PL | DE | EN
04 Manual control – step by step
Manual mode view – main screen

Temperature – main on/off switch

Set the temperature with the slider or by typing a value. You can set a fixed duration or infinity.

  • Slider – quick changes; the target value is shown while sliding.
  • Typing – tap the Temp field and enter a value in °C.
  • Time – choose on the time bar (0–8 h) or tap the time field and set on the clock dial up to 23 hours 59 minutes.
  • Infinity – tap the infinity icon to run without a limit.
Setting the temperature in manual mode Setting the time in manual mode

Probe – main on/off switch

Set the target temperature you want to reach on the probe. After both probes reach their setpoint, all enabled functions will switch off.

  • You can work with one or two probes.
  • Each probe has its own target and switch.
  • You cannot set a probe target higher than the heating temperature.
Probe 1 – setting the target temperature Probe 2 – probe enabled

Smoke generator / Dryer – on/off switches

The smoke generator and the dryer work alternately — both functions cannot be used at the same time.

  • Enabling one function disables the other; the smoke generator cannot operate together with the dryer.
  • Time – choose on the time bar (0–8 h) or tap the time field and set on the clock dial up to 23 hours 59 minutes.
  • Infinity – tap the infinity icon to run without a limit.
Smoke generator – setting operating time Dryer – mutual exclusion message